Debian NTP Server cant synchronize

by mkfb   Last Updated March 27, 2017 12:00 PM

I have Debian 8 and NTP server. Problem is that, NTP Server use only "self" IP server and I don't know why

ntpq -p:

 remote           refid      st t when poll reach   delay   offset  jitter
==============================================================================
 10.1.100.11     .INIT.          16 u    -   64    0    0.000    0.000   0.000

ntp.conf:

# /etc/ntp.conf, configuration for ntpd; see ntp.conf(5) for help
tinker panic 0 

driftfile /var/lib/ntp/ntp.drift


# Enable this if you want statistics to be logged.
statsdir /var/log/ntpstats/

statistics loopstats peerstats clockstats
filegen loopstats file loopstats type day enable
filegen peerstats file peerstats type day enable
filegen clockstats file clockstats type day enable


# You do need to talk to an NTP server or two (or three).
#server ntp.your-provider.example

# pool.ntp.org maps to about 1000 low-stratum NTP servers.  Your server will
# pick a different set every time it starts up.  Please consider joining the
# pool: <http://www.pool.ntp.org/join.html>
#server 0.debian.pool.ntp.org iburst
#server 1.debian.pool.ntp.org iburst
#server 2.debian.pool.ntp.org iburst
#server 3.debian.pool.ntp.org iburst

server 0.pool.ntp.org
server 1.pool.ntp.org
server 2.pool.ntp.org
server 3.pool.ntp.org


#server tempus1.gum.gov.pl iburst
#server tempus2.gum.gov.pl iburst


# Access control configuration; see /usr/share/doc/ntp-doc/html/accopt.html for
# details.  The web page <http://support.ntp.org/bin/view/Support/AccessRestrictions>
# might also be helpful.
#
# Note that "restrict" applies to both servers and clients, so a configuration
# that might be intended to block requests from certain clients could also end
# up blocking replies from your own upstream servers.

# By default, exchange time with everybody, but don't allow configuration.
restrict -4 default kod notrap nomodify nopeer noquery
restrict -6 default kod notrap nomodify nopeer noquery
restrict 192.168.11.0 mask 255.255.255.0 nomodify notrap
restrict 192.168.10.0 mask 255.255.255.0 nomodify notrap
restrict 192.168.255.0 mask 255.255.255.0 nomodify notrap
restrict 10.0.0.0 mask 255.0.0.0 nomodify notrap

# Local users may interrogate the ntp server more closely.
restrict 127.0.0.1
restrict ::1

# Clients from this (example!) subnet have unlimited access, but only if
# cryptographically authenticated.
#restrict 192.168.123.0 mask 255.255.255.0 notrust


# If you want to provide time to your local subnet, change the next line.
# (Again, the address is an example only.)
#broadcast 192.168.123.255

# If you want to listen to time broadcasts on your local subnet, de-comment the
# next lines.  Please do this only if you trust everybody on the network!
#disable auth
#broadcastclient
Tags : debian ntpd


Related Questions



ntpd uses wrong server

Updated March 07, 2017 11:00 AM

Using host as ntp-client and lxc-router as ntp-server

Updated October 18, 2017 22:00 PM

How to prevent ntpd to listen on 0.0.0.0:123?

Updated August 03, 2015 17:00 PM

Why does ntpd listen on so many ports/addresses?

Updated August 28, 2018 05:00 AM